Philips DVDR3370H User Manual

Page 80

To start recording, press REC/OTR

n on the remote control

or RECORD on the DVD recorder.

To start the recording after all other recordings on the disc,
press and hold the REC/OTR

n button until 'SAFE REC' appears

in the display.
For DVD+Rs, each recording is always started after all previous
recordings since previous recordings cannot be overwritten.
The display panel will appear similar to the example shown
below.

C01 1:16:51 P01

Inserting chapter markers

During recording, scenes can be marked so they can be found or hidden
later.
During recording, press

EDIT at the start of the desired location.

'Inserting marker' appears on the TV screen. In the display, the
number of 'CHAPTERS' is increased by one.
For more information about title/chapter, please read the section
'Changing to a different chapter track/title' in the chapter 'Other
playback functions'.

Tip

You can stop recording by pressing STOP

h on the remote or

h on the recorder. 'MENU UPDT' will appear on the display. The

DVD Recorder is preparing the list of contents. Wait until this
message disappears in the display, then the recording is
completed.

aIfdisplay reads 'DISC ERR'

b The recording could not be completed correctly because of a disc

error. Check and clean the inserted disc if necessary.

Problem

Making recordings on DVD+R discs compatible

If you want to playback recordings on a DVD player, you must first
finalize the disc in the DVD recorder. You can use the 'Finalizing'
function on the DVD so that it can be read by the DVD player without
problem. Please read paragraph 'Finalizing DVD+R discs' in the chapter
'Managing disc content'.

Tip

Recording