Philips DVDR3370H User Manual

Page 26

Connecting with a S Video (Y/C) cable

This connecting cable, also known as the SVHS cable, is used to transmit the brightness signal (Y
signal) and color signal (C signal) separately. This mini DIN jack/plug is also called a Hosiden
jack/plug.

Have the following cables ready:
an antenna cable (1, supplied), a power cable (2, supplied), a S-video (SVHS) cable (3), an audio
cable (4, with red/white ends).

Remove the antenna cable plug from your TV. Insert it into the

ANTENNA IN jack at the back of the DVD recorder.

Insert one end of the supplied antenna cable into the

OUT jack at the back of the DVD Recorder and the other end
into the antenna input jack at the back of the TV.

Use a S-Video (SVHS) cable and plug one end into the S-VIDEO
OUT jack at the back of the DVD Recorder and the other end
into the S-Video (SVHS) In jack of the TV (usually called S-Video
in or SVHS in. See your TV's instruction manual).

Use an audio (cinch) cable and plug one end into the red/white
cinch jack AUDIO L/R OUT at the back of the DVD Recorder
(next to S-VIDEO OUT ) and the other into the corresponding
red/white audio input jack of the TV (usually called Audio in', 'AV
in'. See your TV's instruction manual).

Switch on the TV. Then switch the set to the SVHS input jack or
select the corresponding channel number. For the channel
number, please see your TV's instruction manual.

Connecting the DVD Recorder