Philips DVDR3370H User Manual
Page 29
17
5
Press
STANDBY-ON
m on the recorder. 'IS TV ON?' will
appear on the display.
6
Switch on your TV and select the channel used for DVD/VCR
playback on your TV. Choose between channel 3 or 4.
How do I switch the Recorder between channel 3 and 4?
The factory setting is for channel 3. However, if you would like to
switch to channel 4, proceed as follows:
1
Hold 4 on the remote control while '
IS TV ON?' is displayed.
2
'
C04' (channel 4) will appear on the display.
3
If you want to switch back to channel 3, hold 3 . '
C03' (channel 3)
will appear on the display.
?
7
Switch your TV to the selected channel (channel 3 or 4). Use
therefor your TV remote control.
The menu for language selection will appear on the screen.
Initial Setup
Menu Language
English
Español
Français
Press OK to continue
aI don't see a menu for language selection
b Check the cable connections.
b Is 'DVDR' (DVD Recorder operation) lit up in the display?
If not, press the TV/DVD button until 'DVDR' is lit.
b Change between channel 3 and 4 on the TV.
Problem
8
This TV channel number must be used in the future for DVD
recorder playback.
Then, read the paragraph 'Initial installation' in the chapter 'Installing your DVD recorder'.
ENGLISH
Connecting the DVD Recorder