Philips DVDR3370H - Manual (Page 107)

95
Using your DVD Recorder remote control
with your TV set
With the enclosed multicode remote control you can control the main functions of your TV set.
To do this, you must first enter a code number that corresponds to the make of your TV set.
You will find a summary of all available remote control codes on the last page of this manual.
1 Hold down the STANDBY m button.
2 Using the number buttons 0..9 , enter the code number that
corresponds to the make (manufacturer) of your TV set.
When you have entered the code number check that, the TV set
will
responds to the TV VOLUME r or TV
VOLUME q buttons.
aMy TV set will not react
b Also try to enter the other code numbers or that of other
manufacturers.
b In some cases, it is possible that your TV set will not react to the
selected code numbers. If this is the case, you unfortunately cannot
use this function.
aHow can I reset the remote code?
b Enter the code number 000
Problem
3 By using the TV buttons on the panel in the middle of the
control, you can:
TV VOLUME q increase the TV volume
TV VOLUME r decrease the TV volume
MUTE y switch off sound
Hold down the button •TV (left side of the remote) and select
the corresponding function using the following buttons.
STANDBY m switch off the TV set
CHANNEL q next channel number
CHANNEL r previous channel number
0..9 Number buttons 9..0
ENGLISH
User preferences