Philips DVDR3370H User Manual

Page 41

Setting the time/date automatically

This function uses the information sent via the local PBS channel to automatically set the
time/date. For this reason, you must enter the PBS channel that sends this additional information.
When the DVD Recorder chooses a wrong PBS channel or the displayed time/date is wrong,
you must manually set the date/time (see section 'Manually setting the time & date').

Press SYSTEM-MENU on the remote control. The menu bar
will appear.

Select '

' using

D or C .

Select line 'Installation' using

B or A and confirm with C .

Select line 'Time/Date' using

B or A and confirm with C .

Select 'Automatic' with

B or A and confirm with C .

Time/Date

Automatic

PBS Channel

Auto.

Daylight Saving

Off

Time Zone

Auto.

To exit press
SYSTEM MENU

Select the corresponding line with

B or A .

Select the channel which sends the time/date information in the
line 'PBS Channel' and confirm with OK . The DVD Recorder
will check whether or not the information transfer is possible.

a'Clock not set, check channel' will appear on the TV screen

b No time/date data can be received from this TV channel.

Select a different channel or 'Auto.' in line 'PBS Channel'.

Problem

Select one of the following settings in line 'Daylight Saving':
'On': The time set corresponds to summer time (summer time
activated)
'Off': The time set corresponds to the winter time (summer time
is off)

In the line 'Time Zone', select your time zone if the PBS channel
entered was for a different time zone. This is the only way to set
the time correctly, or, if necessary, to correct it.
If you want to use the time zone of the PBS channel, select
'Auto.'.

Confirm the changes with OK .

To end, press SYSTEM-MENU .
The time and date are automatically transferred from the selected
'PBS channel' after the Recorder is shut off.

ENGLISH

Installing your DVD recorder