beautypg.com

Philips DVDR3370H User Manual

Page 35

background image

23

Initial Setup

TV Shape

4:3 letterbox
4:3 panscan
16:9

Press OK to continue

7

Select the desired screen format with

B or A . This setting

only functions if you have inserted a DVD recorded in this
format.

Which screen formats can I choose?

'4:3 letterboxfor a wide-screen display (theatrical format) with black bars

at the top and bottom of the picture.

'4:3 panscanfor a full-height picture with the sides trimmed to fill you TV

screen.

'16:9for wide-screen TV (16:9) aspect ratio

?

8

Confirm with OK .

9

After you connect the antenna (or cable TV, satellite receiver,
etc.) to the DVD recorder, press OK .
Make sure the cable TV signal is connected securely to the
Antenna jack on the rear of the DVD Recorder.
The automatic TV channel search starts. '

WAIT' will appear on the

display.

Installation

Auto Ch. Programming

Searching for TV channels

000 Channels found

Please wait

aDuring the channel search, ifthe DVD Recorder does not

find any TV channels:

b Select another channel on the TV. Do you see that channel on the TV

screen?
If not, check the cable connection of the antenna (antenna jack)
between the DVD Recorder and TV.

b Please have patience.

The DVD Recorder searches the entire frequency range in order to
find and save the largest possible number of TV channels.

b If no antenna is connected, complete the basic settings and then, if

desired, start the automatic channel search (see section 'Automatic TV
channel search').

aThe DVD Recorder finds very few/no channels during the

search.

b It is possible that the automatic switching between antenna/cable does

not properly detect your TV signal. Read the section about how to
switch manually.

Problem

10

Wait until all available TV channels have been found. This can
take several minutes.

11

As soon as the automatic TV channel search is completed, 'Auto
ch. search complete
' will appear on the TV screen along with
the number of channels found.

12

To remove the menus, press the SYSTEM-MENU button on
the Recorder's remote control.

The initial installation is now complete.

ENGLISH

Installing your DVD recorder