Panasonic DP-C106 - Manual (Page 96)

Adding Memory to the Scanner Setting Up the DP-C106
1-75
Adding Memory to the Scanner
The Scanner Memory Card enables 2-Sided copying.
You will need a flat blade screwdriver to perform this procedure.
CAUTION
•
Protect the Memory Card from static electricity by keeping it in the anti-
static bag until you are ready to install it.
•
Handle the card by the top or side edges only. Do not touch the
memory card components or the gold connector edge.
•
Avoid placing the memory card near magnetic devices, such as a PC
Monitor.
•
Avoid exposing the memory card to direct sunlight, high temperatures,
or humidity.
1. Switch Off the power to the Scanner and unplug the Power Cord.
2. Locate the access cover on the left side of the Scanner.