Panasonic DP-C106 - Manual (Page 50)

Installing the Duplex Unit/Kit Setting Up the DP-C106
1-29
6. Install the Duplex Unit/Kit:
a. Align the rails on the tray with the rails in the Printer.
b. Partially close the Duplex Unit/Kit and the paper tray.
7. Install the Lower Inverter:
Skip step a and go to step b, if the Output Tray is not installed.
a. Gently squeeze the sides of the Output Tray toward each other in
order to remove the tray from the Printer.
301053B WOL 0