Panasonic DP-C106 - Manual (Page 119)

Connecting to the Network
4–4
Quick Path to Installation
The DP-C106 can use Ethernet cabling to multiple workstations. It also
supports a parallel cable connection to a single workstation.
Ethernet Cabling
The standard Ethernet cabling includes the following:
•
Unshielded Twisted Pair (UTP), defined as Category 5 for
100Base-TX (Fast Ethernet)
•
Unshielded Twisted Pair (UTP), Category 3, 4, or 5 for use with
10Base-T
The cable uses an 8-pin RJ-45 connector that plugs into the RJ-45
socket on the printer.
Do not attach cables to more than one Ethernet connector; only one
Ethernet connection can be made at any one time.
Parallel Cable Connection
The DP-C106 can also accept print jobs from a Windows computer
through its high-speed, bi-directional parallel port. This connection is
useful for portable computers and for workstations that use dedicated
networks using protocols other than AppleTalk, TCP/IP, or IPX.
Parallel port connections can be used simultaneously with network
connections.
The parallel port accepts a bidirectional Centronics-type (IEEE-1284)
printer cable.
The diagrams on the following pages illustrate typical system
installations. Refer to the page with your preferred platform and
network type. For actual installation and setup, refer to the chapters
that are appropriate to your system.