Panasonic DP-C106 - Manual (Page 80)

Installing the 10 Bin Sorter Setting Up the DP-C106
1-59
4. Perform one of the following:
•
If the DP-C106 does not have the optional Duplex Unit/Kit, ensure
that the vertical edge of the spacer plate is positioned to the right,
near the vertical edge of the attachment plate. No icon should be
visible in the spacer plate cut out. Proceed to step 5.
•
If the DP-C106 has the optional Duplex Unit/Kit, remove the spacer
plate using the two Thumb Screws. Position the plate so its vertical
edge is to the left and Thumb Screws align with the holes in the
base of the extension. Ensure that the Duplex Unit/Kit icon is visible
in the spacer plate cut out. Tighten the Thumb Screws.