Panasonic DP-C106 - Manual (Page 40)

Printer Installation Setting Up the DP-C106
1-19
Printer Installation
Perform this procedure after the Printer is unpacked, and placed in a suitable
location.
If you are installing the 10 Bin Sorter, skip step 1 and go to step 2.
1. Locate the Output Tray in the cardboard tray removed from the top of
the printer. Install the tray by performing steps a through c.
a. Standing on the left-hand side of the Printer, hold the Output Tray
as shown.
301031B WOL 0
Do not place the metal spring into the hole. Ensure that the metal spring
extends down against the outside of the cover.
b. Place the right-hand arm of the tray into the corresponding hole as
shown.
301032B WOL 0