Paradyne Hotwire 8620 - Manual (Page 74)

1. Network Management Specification
68 June 2003 8000-A2-GB30-00
The value of this object will be mib-2.
7.1.2.2.4 entLogicalTAddress.
The value of this object will be the IpAddress and UDP port used to access the MCP card.
7.1.2.2.5 entLogicalIPDomain.
The value of this object will be the kind of transport service by which the MCP card can
receive management traffic. This value will be snmpUDPDomain.
7.1.2.2.6 entLogicalContextEngineID.
The value of this object will be the null-string.
7.1.2.2.7 entLogicalContextName.
The value of this object will be the null-string.
7.1.2.3 entAliasMappingTable.
The entAliasMappingTable {entityMapping 2} will be supported for all the ports specified
in the entPhysicalTable to allow mapping between ifIndexes and the corresponding
entPhysicalIndex. The entAliasLogicalIndexOrZero shall be zero. The
entAliasMappingIdentifier is a pointer that points to the ifTable row.
7.1.2.4 entPhysicalContainsTable.
The entPhysicalContainsTable {entityMapping 3} will be supported to expose the
container/”containee” relationships between physical entities.
Valid Object Value(s):
The following table shows the entPhysicalChildIndex values for the different
entities.ss=[1..20].
Table 1-77. entAliasMappingEntry {entAliasMappingTable 1}
Object OID Syntax Access Status
Sup-
ported
entAliasLogicalIndexOrZero {entAliasMappingEntry 1} INTEGER not-accessible current Yes
entAliasMappingIdentifier {entAliasMappingEntry 2} RowPointer read-only current Yes
Table 1-78. entPhysicalContainsEntry {entPhysicalContainsTable 1}
Object OID Syntax Access Status
Sup-
ported
entPhysicalChildIndex {entPhysicalContainsEntry 1} PhysicalIndex not-accessible current Yes