Paradyne Hotwire 8620 - Manual (Page 30)

1. Network Management Specification
24 June 2003 8000-A2-GB30-00
4.1.8 “ifOperStatus” Object (ifEntry 8)
This object is used to specify the current operational state of the interface. The value of this
object for each interface will be defined as follows:
Table 1-11. ifAdminStatus
Interface ifAdminStatus
AAL5 Up(1)
ATMUP Up(1)
DSL Up(1), Down(2)
DSLATM Up(1)
DSLChan Up(1)
E1 Up(1), Down(2)
ETH1 Up(1), Down(2)
IMA Up(1), Down(2)
SONET Up(1), Down(2)
SONETPath Up(1), Down(2)
T1 Up(1), Down(2)
Table 1-12. ifOperStatus
Interface ifOperStatus
AAL5 Up(1), Down(2), Testing(3), Unknown(4), notPresent(6), lowerLayerDown(7)
ATMUP Up(1), Down(2), Testing(3), Unknown(4), notPresent(6), lowerLayerDown(7)
DSL Up(1), Down(2), Testing(3), Unknown(4), notPresent(6), lowerLayerDown(7)
DSLATM Up(1), Down(2), Testing(3), Unknown(4), notPresent(6), lowerLayerDown(7)
DSLChan Up(1), Down(2), Testing(3), Unknown(4), notPresent(6), lowerLayerDown(7)
E1 Up(1), Down(2), Testing(3), Unknown(4), notPresent(6), lowerLayerDown(7)
ETH1 Up(1), Down(2), Testing(3), Unknown(4), notPresent(6), lowerLayerDown(7)
IMA Up(1), Down(2), Testing(3), Unknown(4), notPresent(6), lowerLayerDown(7)
SONET Up(1), Down(2), Testing(3), Unknown(4), notPresent(6), lowerLayerDown(7)
SONETPath Up(1), Down(2), Testing(3), Unknown(4), notPresent(6), lowerLayerDown(7)
T1 Up(1), Down(2), Testing(3), Unknown(4), notPresent(6), lowerLayerDown(7)