Paradyne Hotwire 8620 - Manual (Page 22)

1. Network Management Specification
16 June 2003 8000-A2-GB30-00
3.1 Management Information Base (MIB)-II - RFC 1213.
The objects defined by MIB-II are organized into 10 different groups. The GranDSLAM
3.0 will implement only those groups where the semantics of the group are applicable to
the implementation of the stack (for example, if EGP is not implemented the EGP group
will not be supported). The MIB-II object groups supported by the GranDSLAM 3.0 are
as follows:
System Group Supported.
Interfaces Group Supported for the Internet Assigned Numbers
Authority (IANA) ifTypes:
ATM Cell layer (IANAifType = 37)
ATM AAL-5 layer ( IANAifType = 49)
DS-1 Interface (IANAifType = 18) for
T1 interface.
E1 Interface (IANAifType = 19) for E1
interface.
ADSL Interface (IANAifType=94)
SHDSL Interface (IANAifType=169)
ETHERNET Interface (IANAifType = 6)
ADSL Fast Channel (IANAifType =
125), or
ADSL Interleave Channel (IANAifType
= 124)
IMA Interface (IANAifType = 107)
SONET Interface (IANAifType = 39)
SONETPATH (IANAifType = 50)
IP Group NOT_SUPPORTED.
ICMP Group NOT_SUPPORTED.
TCP Group NOT_SUPPORTED.
UDP Group NOT_SUPPORTED.
EGP Group NOT_SUPPORTED
Transmission Group SUPPORTED
SNMP Group SUPPORTED.
3.2 System Group, MIB-II (RFC 1213)
The System Group Objects are fully supported by the GranDSLAM 3.0. The following
sections provide clarification for objects contained in the System Group when it is not clear
how the object definition in MIB-II is related to the GranDSLAM 3.0.
3.2.1 “sysDescr” Object (system 1)
This object provides the full name and version identification for the system’s hardware and
software. This object will be set to display the following string:
“Paradyne DSLAM Chassis;”
Where:
Chassis This value will be 8820 or 8620.