Paradyne Hotwire 8620 User Manual
Page 15
1. Network Management Specification
8000-A2-GB30-00
June 2003
9
hdsl2ShdslPerfSESThresh
This notification indicates that the
severely errored seconds threshold has
been reached/exceeded for the
HDSL2/SHDSL segment endpoint.
hdsl2ShdslEndpointCurr15MinSES,
hdsl2ShdslEndpointThreshSES
devLastTrapString
hdsl2ShdslPerfCRCanomaliesThresh
This notification indicates that the CRC
anomalies threshold has been
reached/exceeded for the HDSL2/SHDSL
segment endpoint.
hdsl2ShdslEndpointCurr15MinCRCa
nomalies,
hdsl2ShdslEndpointThreshCRCanom
alies
devLastTrapString
hdsl2ShdslPerfLOSWSThresh
This notification indicates that the LOSW
seconds threshold has been
reached/exceeded for the HDSL2/SHDSL
segment endpoint.
hdsl2ShdslEndpointCurr15MinLOS
WS,
hdsl2ShdslEndpointThreshLOSWS
devLastTrapString
hdsl2ShdslPerfUASThresh
This notification indicates that the
unavailable seconds threshold has been
reached/exceeded for the HDSL2/SHDSL
segment endpoint.
hdsl2ShdslEndpointCurr15MinUAS,
hdsl2ShdslEndpointThreshUAS
devLastTrapString
hdsl2ShdslSpanInvalidNumRepeaters
This notification indicates that a
mismatch has been detected between the
number of repeater/regenerator units
configuredfor a HDSL2/SHDSL line via
the hdsl2ShdslSpanConfNumRepeaters
object and the actual number of
repeater/regenerator units discovered via
the EOC.
hdsl2ShdslSpanConfNumRepeaters
devLastTrapString
hdsl2ShdslLoopbackFailure
This notification indicates that an
endpoint maintenance loopback command
failed for an HDSL2/SHDSL segment.
hdsl2ShdslMaintLoopbackConfig
devLastTrapString
hdsl2ShdslpowerBackoff
This notification indicates that the bit
setting for powerBackoff in the
hdsl2ShdslEndpointCurrStatus object for
this endpoint has changed.
hdsl2ShdslEndpointCurrStatus
devLastTrapString
hdsl2ShdsldeviceFault
This notification indicates that the bit
setting for deviceFault in the
hdsl2ShdslEndpointCurrStatus object for
this endpoint has changed.
hdsl2ShdslEndpointCurrStatus
devLastTrapString
hdsl2ShdsldcContinuityFault
This notification indicates that the bit
setting for dcContinuityFault in the
hdsl2ShdslEndpointCurrStatus object for
this endpoint has changed.
hdsl2ShdslEndpointCurrStatus
devLastTrapString
hdsl2ShdslconfigInitFailure
This notification indicates that the bit
setting for configInitFailure in the
hdsl2ShdslEndpointCurrStatus object for
this endpoint has changed.
hdsl2ShdslEndpointCurrStatus
devLastTrapString
Table 1-4.
Summary of Traps (3 of 7)
Trap
Description
VarBind(s)