Paradyne Hotwire 8620 - Manual (Page 13)

1. Network Management Specification
8000-A2-GB30-00 June 2003 7
2. Standards Compliance for SNMP Traps
This section describes the standards compliance and any special operational
features/options for the SNMP Traps supported by the GranDSLAM 3.0 products. The
following traps are supported.
Table 1-4. Summary of Traps (1 of 7)
Trap Description VarBind(s)
Standard Traps
LinkDown Signifies that the unit has recognized a
failure in one of the communication
interfaces. ifIndex(RFC 2863)
ifAdminStatus(RFC 2863)
ifOperStatus(RFC 2863)
devLastTrapString
LinkUp Signifies that the unit recognized that one
of the communication interfaces has come
up. ifIndex(RFC 2863)
ifAdminStatus(RFC 2863)
ifOperStatus(RFC 2863)
devLastTrapString
WarmStart Signifies that the SNMPv2 entity, acting
in an agent role, is reinitializing itself such
that its configuration is unaltered. devLastTrapString
AuthenticationFailureTrap Signifies that the SNMPv2 entity, acting
in an agent role, has received a protocol
message that is not properly
authenticated. While all implementations
of the SNMPv2 must be capable of
generating this trap, the
snmpEnableAuthenTraps object indicates
whether this trap will be generated. devLastTrapString
DSX Traps
dsx1LineStatusChange value of an instance dsx1LineStatus
changes ifIndex,
dsx1LineStatus,
dsx1LineStatusLastChange
devLastTrapString
ATM-M4 Traps
atmfM4IfAisAlarm AIS condition has occurred. ifIndex,
ifOperStatus,
atmfM4TrapAlarmSeverity
devLastTrapString
atmfM4IfLcdAlarm LCD (Loss of Cell Delineation) condition
has occurred.
atmfM4IfLosAlarm LOS (Loss of Signal) condition has
occurred.