Paradyne Hotwire 8620 - Manual (Page 70)

1. Network Management Specification
64 June 2003 8000-A2-GB30-00
The following table shows the entPhysicalMfgName designated for the entities.
7.1.2.1.13 entPhysicalModelName
The vendor-specific model name identifier string associated with this physical component.
The preferred value is the customer-visible part number, which may be printed on the
component itself. If the model name string associated with the physical component is
unknown to the agent, then this object will contain a zero-length string.
Valid Object Value(s):
The following table shows the entPhysicalModelName designated for the entities..
Table 1-71. entPhysicalMfgName
Entity entPhysicalMfgName
Chassis “Paradyne”
Container "Paradyne"
Module “Paradyne”
Splitter card “Paradyne”
DSL Port “A String reflecting the DSP Manufacturer”
T1/E1 port “Paradyne”
OC3 port “Paradyne”
Console port “Paradyne”
Ethernet Mgmt port “Paradyne”
Temp Sensor “Paradyne”
Fan “Paradyne”
Management Plane PLD “Paradyne”
Led PLD “Paradyne”
T1/E1 PLD “Paradyne”
Table 1-72. entPhysicalModelName (1 of 2)
Entity entPhysicalModelName
Chassis zero-length-string
Container zero-length-string
Module A String describing the Model Number of the Module
Splitter card A String describing the Model Number of the Splitter Card
DSL Port zero-length-string
T1/E1 port zero-length-string
OC3 port zero-length-string
Console port zero-length-string