Paradyne Hotwire 8620 - Manual (Page 71)

1. Network Management Specification
8000-A2-GB30-00 June 2003 65
7.1.2.1.14 entPhysicalAlias
This object is an ’alias’ name for the physical entity as specified by a network manager, and
provides a non-volatilehandle’ for the physical entity. On the first instantiation of an
physical entity, the valueof entPhysicalAlias associated with that entity is set to the
zero-length string. However, agent may set the value to a locally unique default value,
instead of a zero-length string. If write access is implemented for an instance of
entPhysicalAlias, and a value is written into the instance, the agent must retain the supplied
value in the entPhysicalAlias instance associated with the same physical entity for as long
as that entity remains instantiated. This includes instantiations across all
reinitializations/reboots of the network management system, including those which result
in a change of the physical entity’s entPhysicalIndex value.
Valid Object Value(s):
The following table shows the entPhysicalAlias assigned by default to the entities. This
object is supported R/W.
Ethernet Mgmt port zero-length-string
Temp Sensor zero-length-string
Fan zero-length-string
PowerSupply zero-length-string
Management Plane PLD zero-length-string
Table 1-73. entPhysicalAlias
Entity entPhysicalAlias
Chassis zero-length-string
Container zero-length-string
Module zero-length-string
Splitter card zero-length-string
DSL Port zero-length-string
T1/E1 port zero-length-string
OC3 port zero-length-string
Console port zero-length-string
Ethernet Mgmt port zero-length-string
Temp Sensor zero-length-string
Fan zero-length-string
PowerSupply zero-length-string
Management Plane PLD zero-length-string
Table 1-72. entPhysicalModelName (2 of 2)
Entity entPhysicalModelName