Pioneer SX-LX03 - Manual (Page 87)

Getting Started 03
87
En
Erasing the additional data
from BD-ROMs
When a BD-ROM is played, additional data
may be stored in the player’s memory (local
storage).
If the message indicating low memory (local
storage) appears, erase the BDMV data.
Caution
• When the BDMV data is erased, all the data
of secondary video (Picture-in-Picture),
secondary audio, bookmark, etc. that has
been stored is erased.
1 Display the Tools menu.
With no disc loaded, press the TOOLS button.
2 Select and set the item.
Use
/ to select BDMV Data Erase, then
press ENTER.
3 Erase the data.
Use
/ to select Yes, then press ENTER.
Caution
• It takes time to erase the BDMV data for a
while. Do not unplug the power cord for
about 10 seconds after performing the
above procedure.
Switching the video output
terminal
Use the procedure below to switch the video
output terminal. Switch between the digital
output (
HDMI OUT terminal) and the analog
output ( COMPONENT VIDEO, S-VIDEO or
VIDEO output terminals).
• Switch the terminal from which the
video signals are output.
The video output terminal switches each time
the button is pressed.
Caution
• The picture may not be displayed for a
while when the video output terminal is
switched.
• When the HDMI OUT terminal is selected,
no video signals are output from the other
video output terminals.
• When a video output terminal other than
the HDMI OUT terminal is selected, no
video signals are output from the HDMI
OUT terminal. However, audio signals are
output.
Switching the output video
resolution
Use the procedure below to switch the output
video resolution from the various video output
terminals.
SETUP
TOOLS
Output Video Resolution
BDMV Data Erase
BD PLAYER
TOOLS
ENTER
ENTER
Yes No
Erases all of the data
added from BDMV.
Please wait a while.
OK to erase data?
SOUND
VIDEO
SELECT
LX03BD_2.book Page 87 Monday, July 28, 2008 4:30 PM