Pioneer SX-LX03 - Manual (Page 76)

Player connections 02
76
En
Chapter 2
Player connections
Connecting a TV
Be sure to turn off the power and unplug the
power cord from the power outlet whenever
making or changing connections.
Note
• Make the settings in the Setup Navigator
menu according to the type of cable
connected (page 83).
Connecting using the HDMI cable
included with this receiver
The audio and video signals can be transferred
to HDMI-compatible devices as digital signals
with no loss of sound or video quality. After
connecting, make the settings at the
Setup
Navigator menu according to the connected
HDMI-compatible device (page 83).
Also refer to the operating instructions of the
device being connected.
Note
• The HDMI indicator on the player’s front
panel lights when an HDMI-compatible
device is connected. (Depending on the
connected device, in some cases it may
only light when the player is selected as the
device’s input.)
• 1080p video signals may not be output,
depending on the HDMI cable being used.
Caution
• Hold the plug when connecting and
disconnecting the cable.
• Placing a load on the plug could result in
faulty contact and no video signals being
output.
L
ANALOG
COAX
R
AUDIO IN
DIGITAL IN
DIGITAL IN
HDMI OUT IN 2 IN 1 3
OPTICAL
AM
LO
FM
UM
75 2
1
R
AUDIO OUT ( 7.1 ch )
VIDEO OUT
HDMI OUT
DIGITAL
OUT
CONTROL
IN
L
Y
P B
P R
FRONT
OPTICAL COMPONENT
VIDEO
SURROUND CENTER
VIDEO
S-VIDEO
SUB WOOFER
SURROUND BACK
TV
To HDMI input terminal
HDMI cable
(included)
HDMI cable
(included)
Receiver’s rear panel
Player’s rear panel
Direction of
signal flow
LX03BD_2.book Page 76 Monday, July 28, 2008 4:30 PM