Clip metadata – Philips P2HD AG-HPX170P User Manual
Page 57
Shooting
7
Clip metadata
SHOOT:
This indicates the SHOOTER (name of the
videographer), START DATE (date and time at
which shooting started), END DATE (date and
time at which shooting ended) and LOCATION/
ALTITUDE/LONGITUDE/LATITUDE/SOURCE/
PLACE NAME (shooting location, altitude,
longitude, latitude, information source, name of
location).
SCENARIO:
This indicates the PROGRAM NAME, SCENE
NO. and TAKE NO.
NEWS:
This indicates the REPORTER (name of the
reporter), PURPOSE (purpose of data collection)
and OBJECT (target of data collection).
MEMO: *
This indicates the No. (memo No.), OFFSET
(frame position from the beginning of the clip),
PERSON (name of the person who recorded the
text memo), and TEXT (contents of memo).
THUMBNAIL:
Indicates thumbnail image offset.
It is used in editing thumbnails with the EXCH.
THUMBNAIL function.
*1 If there is no information in the metadata
upload file, the global clip ID serves as the
USER CLIP NAME. The USER CLIP NAME
recording method is selectable. Please refer to
Appendix (page 124).
*2 When MEMO is to be input, you must input
TEXT. You cannot input PERSON only.
It may not be possible to load files which have
been edited using a viewer other than the P2
Viewer. (In this case, UNKNOWN DATA will be
displayed.)
Only printable ASCII characters can be
displayed by this unit.
Due to the limitations imposed by this unit
on the number of characters which can be
displayed, not all the data can be displayed.
(This does not mean that the data which is
not displayed has been deleted.) Use a P2
viewer or other program to check all the data.
•
•
•
You can add the video and audio systems, name
of the videographer, shooting location, text memos
and other information to the video data you have
recorded on the P2 card. This data is called the clip
metadata. (Display method: Page 69)
There are two kinds of clip metadata: the data that
is recorded automatically during shooting, and the
data in the metadata upload file created on the SD
memory card which is loaded in the unit. (Loading
method: Page 72)
Creating the metadata upload file on the SD
memory card
You will need the latest updated version of P2
Viewer. Download it from the URL address given
below, and install it in the computer.
What the clip metadata consists of
You can set the items underlined below by loading
the metadata upload file on the SD memory
card. All other items are set automatically during
shooting.
GLOBAL CLIP ID:
This indicates the global clip ID that shows the
shooting status of the clip.
USER CLIP NAME:
This indicates the name of the clip that the user
has set.*1
VIDEO:
This indicates the recorded image’s FRAME
RATE, PULL DOWN system and ASPECT
RATIO.
AUDIO:
This indicates the recorded sound’s SAMPLING
RATE (sampling frequency) and BITS PER
SAMPLE (number of quantizing bits).
ACCESS:
This indicates the CREATOR (name of the
person recording), CREATION DATE (recording
date), LAST UPDATE DATE (date on which the
data was last updated), and LAST UPDATE
PERSON (the person who last updated the data).
DEVICE:
This indicates the MANUFACTURER
(manufacturer of the equipment), SERIAL NO.
(serial number of the equipment) and MODEL
NAME (equipment model name).