Philips P2HD AG-HPX170P - Manual (Page 100)

100
Item
Display
mode
Description of settings
V DETAIL FREQ (Camera) Sets the vertical detail for shooting in 480i progressive mode.
THIN: Makes the detail thin.
MID: Makes the detail slightly thicker.
THICK: Makes the detail thicker.
When images were shot in the progressive mode in which the vertical
detail is set as “THIN” or “MID” and are played on a monitoring
television (60i interlace), you will see flickers caused on horizontal
lines and almost horizontal oblique lines. When playing back images
in the progressive mode or when editing images or performing other
postprocessing, images with a higher resolution will be obtained with
the THIN or MID setting than with the THICK setting.
NAME EDIT (Camera) Edits the name of the selected scene file you have selected with the
scene file dial.
CAMERA SETUP screen
Item
Display
mode
Description of settings
ASPECT CONV (Camera) elects the aspect ratio of the image you record in 480i format. This item
cannot be selected when the 1080i or 720P recording format is used.
(Page 41)
SIDE CROP: Crops the right and left edges of the image.
LETTER BOX: Adds black bands at the top and bottom of the image.
SQUEEZE: Squeezes the image horizontally.
SETUP (Camera) Switch the setup level of video signals in 480i format using a P2 card.
0%:
Setup is switched to 0% for both the camera output and the recording.
7.%A:
Setup is switched to 7.5% for the camera output and 0% for the
recording.
___indicates the factory setting.
Setup menu list (continued)
SCENE FILE screen (continued)