Philips P2HD AG-HPX170P - Manual (Page 108)

108
Item
Display
mode
Description of settings
INT MIC (Camera) Determines whether or not input from the internal microphone is used
during recording.
ON: Uses internal microphone input.
OFF: Does not use internal microphone input.
DISPLAY SETUP screen
Item
Display
mode
Description of settings
ZEBRA DETECT 1 (Camera) Selects the brightness level of the left-leaning zebra patterns on the
screen.
0%, %, 0%, %, 70%, 7%, 80%, 8%, 90%, 9%, 100%, 10%
ZEBRA DETECT (Camera) Selects the brightness level of the right-leaning zebra patterns on the
screen.
0%, %, 0%, %, 70%, 7%, 80%, 8%, 90%, 9%, 100%, 10%,
OFF
The zebra patterns do not appear if you select OFF.
MARKER (Camera) Select ON to display the marker. (Page 40)
ON, OFF
To display the marker, press the ZEBRA button.
SAFETY ZONE (Camera) Sets SAFETY ZONE to ON or OFF.
OFF, 90%, :, 1:9, 1:9
FOCUS BAR (Camera) Turns the FOCUS ASSIST bar display ON or OFF.
ON, OFF
When set to ON, the FOCUS ASSIST bar can be displayed.
VIDEO OUT OSD (Camera)
(MCR)
Select ON to output the information displayed on the screen together
with the signals from the VIDEO IN/OUT jack.
ON, OFF
DATE/TIME (Camera)
(MCR)
Sets whether to display the date and time on the screen and whether to
output from the VIDEO IN/OUT jack.
OFF:
The date and time are not displayed.
TIME:
The time is displayed.
DATE:
The date is displayed.
TIME&DATE:
The time and date are displayed.
LEVEL METER (Camera)
(MCR)
Select ON to display the audio level meter.
ON, OFF
ZOOM·FOCUS (Camera) Selects the unit of zoom and focus values.
OFF, NUMBER, mm/feet, mm/m
Use the mm/feet or mm/m display only as a general guideline since it is
not entirely accurate.
CARD/BATT (Camera)
(MCR)
Select ON to display the remaining P2 card recording capacity and
remaining battery charge.
ON, OFF
PCARD REMAIN (Camera)
(MCR)
Determines how remaining P2 card capacity is displayed.
ONE-CARD: Displays how much space is left on the P2 card that is
currently being recorded.
TOTAL: Displays the total amount of space that is left on P2 cards
inserted in the camera.
___indicates the factory setting.
Setup menu list (continued)
AV IN/OUT SETUP screen (continued)