Using sd/sdhc memory cards, Installing and removing the sd memory card, Formatting sd memory card – Philips P2HD AG-HPX170P User Manual
Page 29: Cautions in using sd memory cards, Installing and removing, The sd memory card, And 29
Shooting
9
Using SD/SDHC memory cards
You can use SD and SDHC memory cards (the
term “SD memory card” is used for both hereafter)
to save and load SCENE files and USER files, and
to upload clip meta data. (Page 55)
Installing and removing the SD
memory card
Installation
1
Lift up the viewfinder, press the side of the
card slot cover (A), and slide the cover (B)
to open it.
Insert the card while making sure it is
oriented in the proper direction.
2
Access lamp
Close the card slot cover.
Removal
1
Open the card slot cover, and check that
the access lamp is not lit.
Press the card further into the unit, grasp
the card, and then remove.
Close the card slot cover.
Formatting SD memory card
1
Set the POWER switch to ON. (Page 19)
Press the mode button and set it to MCR
mode (the MCR lamp lights).
Press the MENU button.
On the menu, select OPERATION, FORMAT
and then SD CARD. (Page 8)
Select EXIT to cancel the formatting.
•
THUMBNAIL
OPERATION
PROPERTY
META DATA
EXIT
DELETE
FORMAT
REPAIR CLIP
RE-CONNECTION
EXCH.THUMBNAIL
EXIT
SLOT1
SLOT2
SD CARD
EXIT
Select YES on the confirmation screen.
The selected SD memory card is formatted.
You can also format from the SD CARD
FORMAT option on the CARD FUNCTIONS
screen. (Page 110)
With SDHC cards, 32 KB of capacity will have
been used.
Cautions in using SD memory cards
SD memory cards used with the AG-HPX170P
should conform to SD or SDHC standards. Be
sure to format cards using the AG-HPX170P.
SD memory cards with the following capacity can
be used for the AG-HPX170P.
SD (from 8 MB to GB):
8 MB 16 MB 32 MB 64 MB 128 MB
256 MB 512 MB 1 GB 2 GB
SDHC ( GB to 1 GB):
4 GB 8 GB 16 GB
For the latest information not available in the
Operating Instructions, visit the P2 Support Desk
at the following Web sites.
SD memory cards must not be used or stored in
an environment where they may be Exposed to
high temperatures/humidities;
Exposed to water droplets; or
Electrically charged.
Be sure always close the cover when using an
SD memory card.
See also “Checkpoints for using memory cards”
on page 122.
•
•
•
•
•
•
•