Polycom 3725-26470-004/A - Manual (Page 48)

User’s Guide for Polycom HDX Desktop Systems
44 Polycom, Inc.
Displaying the Far Site’s Name When the Call Connects
If your system administrator has allowed access to user settings, you can
specify whether to display the far site’s name when the call connects and how
long to leave the name on the screen.
To specify when to display the name of the far site:
1 Select System from the Home screen.
2 Select User Settings from the System screen.
3 Select Next to see more settings.
4 Scroll to Far Site Name Display Time, press on the remote control or
keypad, and select to display the far site’s name during the entire call, for
a specified time, or not at all.
5 Press Home to save your change and return to the Home screen.
Hearing Audio Confirmation When You Dial
If your system administrator has allowed access to user settings, you can set
up the system to speak each number as you enter it in the dialing entry field
on the Place a Call screen.
To enable audio confirmation:
1 Select System from the Home screen.
2 Select User Settings from the System screen.
3 Select Next to see more settings.
4 Scroll to Keypad Audio Confirmation and press on the keypad or
remote control to enable the option.
5 Press Home to save your change and return to the Home screen.
Adjusting for Room Lighting
If your system administrator has allowed access to user settings, you can use
the backlight control to adjust the brightness of the video that the main camera
sends to the Polycom HDX system. Adjusting this setting can be helpful when
the room arrangement results in strong light coming from behind the people
in the picture.
Because backlight controls adjust the built-in camera, these controls do not make
content from a computer appear brighter.