Showing content with people+content™ ip – Polycom 3725-26470-004/A User Manual
Page 25
User’s Guide for Polycom HDX Desktop Systems
Polycom, Inc.
21
To stop sending content, select one of the following options:
— Press the
Send Computer button on the keypad.
— Press
Content
on the remote control.
Showing Content with People+Content™ IP
People+Content™ IP allows you to send content from a computer that is not
connected directly to the Polycom HDX system.
To install People+Content IP on a computer:
1
On a computer with a Microsoft® Windows XP, Windows Vista, or
Windows 7 operating system, open a web browser and go to
polycom.com/ppcip
.
2
Download and install the People+Content IP software.
To start showing content:
1
On the computer, start the Polycom People+Content IP application.
2
Enter the IP address or host name of the Polycom HDX system and the
meeting password, if one is set.
3
On the computer, click Connect.
4
Open the content you want to show, and click
in People+Content IP.
Points to note about People+Content IP:
•
People+Content IP provides video-only content. No audio is shared.
•
People+Content IP supports any computer desktop resolution with color set to
16-bit or higher.
•
Your computer resolution can be set to anything, but People+Content IP scales
the image to 1024x768 or 1280x720.
•
The People+Content IP application must be installed on a computer.
•
For a computer connected directly to the Polycom HDX system, Polycom
recommends using the
Send Computer button or
Content
button instead of People+Content IP.
If you are using multiple screens on your computer, move the People+Content IP
icon to the screen you want to share.