Polycom SpectraLink 1725-36034-001 - Manual (Page 84)

SpectraLink 8002 Wireless Telephones Configuration and Administration (SIP)
84 PN: 1725-36034-001_B.doc
be at least one AP stronger than -60 dBm in all areas for 11mb/s
operation) and has good channel allocation. (At any point, the
strongest AP shown should be on a different channel than the next
best choice.)
3. Finally, use the single AP ( MyID / Detl ) display to check each AP, to
ensure it is configured for the proper data rates, beacon interval,
802.11 options enabled, QoS method, and security method.
Make any necessary adjustments to AP locations and configurations
and repeat steps 1 through 3 until the site survey shows adequate
coverage and correct configuration at every location.
The installation is not complete until these certification steps have
been performed. Do not hand out handsets at a site that has not been
certified.