Polycom SpectraLink 1725-36034-001 - Manual (Page 21)

PN: 1725-36034-001_B.doc 21
SpectraLink 8002 Wireless
Telephone Configuration
Each SpectraLink 8002 handset may be configured for site-specific
requirements by opening the Admin menu and selecting options or
entering specific information. Any settings entered in the Admin
menu must conform to system settings. Only the handset being
configured is affected by the Admin menu settings.
The Wireless Telephone user may select several usability options from
the Standby menu, described below in the User-defined Preferences
section. This information is also provided in the end-user manual.
The SpectraLink Configuration Cradle is an accessory device
designed to automate configuration of SpectraLink 8002 Wireless
Telephones. The Configuration Cradle is connected to a PC via a
serial cable. A downloadable Configuration Cradle program runs on
the PC and enables the system administrator to establish and store
configuration options for system, group and user categories. A
configuration plan may be set up in the program and downloaded
into a handset or a configured handset may be placed in the cradle
and its configuration may be uploaded and edited or saved.
Please see your service representative or contact Polycom Customer
Service for more information about this time-saving device.
2