Polycom SpectraLink 1725-36034-001 - Manual (Page 62)

SpectraLink 8002 Wireless Telephones Configuration and Administration (SIP)
62 PN: 1725-36034-001_B.doc
Menus
Line menu
The Line menu allows you to activate a call on a selected line or to
view the status of lines.
View the five line appearances by pressing the
LINE key. The line
number and extension number of the first four lines are displayed.
Press the
LINE key again to view the fifth line. Active lines are in bold
face. Defined but unregistered lines are faded. Lines that have been
forwarded are prefixed with the greater-than character (
> ) followed
by the forwarding destination.
Pressing the
LINE key from the active mode displays a menu of line
appearances as programmed in the SIP TFTP configuration file. The
LINE key can be pressed while the handset is in the standby mode to
activate the handset and to activate a new call on the selected line.
The currently selected line is indicated by an asterisk (
* ). Lines for
which the corresponding proxy server has outstanding new mail are
flagged with plus (
+ ) characters. Lines that should be registered to a
proxy but have failed registration for any reason are displayed in
faded text and are not selectable from the menu.
Exit the
LINE display by pressing a line number key to start a new call
on the selected line and put any other call on hold, or by pressing the
End Call key to exit without starting a new call. Press the More softkey
to page through additional items on the Line menu.
Favorites menu
The Favorites menu provides access to a predefined list of dial
numbers. The list is programmed by the system administrator and
may include common or handset-specific entries. For handset-specific
entries, the user must provide a list of numbers to the system
administrator for programming. Numbers on the Favorites list cannot
be programmed in or through the handset by the end user.
The Favorites list can include either complete dial numbers for named
parties or partial numbers that need additional data entry. Here is a
partial entry example: If a PBX feature access code for call forwarding
is defined in the Favorites list but you need to add the forwarding