beautypg.com

Configuration process – Polycom SpectraLink 1725-36034-001 User Manual

Page 42

background image

SpectraLink 8002 Wireless Telephones Configuration and Administration (SIP)

42

PN: 1725-36034-001_B.doc

Configuration Process

1. Download the latest SpectraLink 8002 Wireless Telephone

software from

http://www.polycom.com/usa.en/support/voice/wi-
fi/spectralink_8002_wireless.html

.

2. Download the latest version of the SIP code and place it on the

TFTP server and ensure the TFTP server is started. The five files
that are needed must be named:
slnk_cfg.cfg
pd11wsd.bin
pd11wsd3.bin
pd11gl3.bin
pi110001.bin

3. Configure the handsets using the Admin menu. See Chapter 2

SpectraLink 8002 Wireless Telephone Configuration for detailed
configuration instructions.
a Ensure the

License

Option

menu option is set to

22

.

b Configure the

SIP Registration

settings.

c If statically assigning IP addresses, ensure that the

Phone

IP

address

,

TFTP

server

IP

,

Subnet

Mask

,

Default

Gateway

, and

SIP

TFTP

server

IP

addresses

are accurate. If using a DHCP server, ensure

that appropriate options are set for the TFTP server.

d Ensure the handset has properly configured

ESSID

. If you are

accepting broadcast

ESSIDs

at your APs, the handset will

automatically learn the ESSID information when powering on.

e Set the

Reg

Domain

.

f Configure the handset security settings.
g Set the

Preferred

Channels

.

4. Power cycle the handset.
5. If the handset code needs to be updated, the SIP code will now

download to the handset. The status bar will increment fully
across the display for each function that is being performed in the
download process. Upon completion of the update process, the
handset will re-boot with the new firmware.

This manual is related to the following products: