Polycom SpectraLink 1725-36034-001 - Manual (Page 61)

Using the SIP Handset
PN: 1725-36034-001_B.doc 61
Softkey Name Displayed… Press to…
Fwd Forward Definition Prior to entering the first
character of a dial number.
Delete a previously defined
forward destination.
Or initiate definition of a new
forward destination.
Hold Hold In an active call. Place the call on hold. The line
status shows x when the call is
on hold or * when audio is
flowing.
Msg Message Initial dial screen when new
line is selected and a dial
tone is active prior to
entering first character of the
number to be dialed3. Initiate a call to the specified
message center contact address
for retrieval or administration of
voicemail.
Mute Toggle muting When in an active call. Toggle audio transmission to the
far end. The line status shows *
when not muted or x when
muted.
OK OK Power up registration if
username is not configured
in admin menu. Send the username and
password to the SIP server for
authorization to register the
handset.
Redl Redial Prior to entering the first
character of a dial number. Redial the last number that was
dialed.
Rej Reject Incoming call on the selected
line. Reject the incoming call. The SIP
server will then redirect the call
elsewhere if configured to do so.
Rsme Resume In an active call and you
have placed the call on hold
or in standby mode if any call
is on hold. Resume a call that was
previously placed on hold or that
went on hold when another line
was activated.
Save Save Entering a dial number as a
forward destination. Save the dial number as the
forwarding destination for the
selected line.
3 Appears only if the PROXYn_MAIL_NOTIFY is configured. A message center contact address must be defined for the proxy used
by the selected line.