Polycom SpectraLink 1725-36034-001 - Manual (Page 49)

Programming the SIP Handset Features
PN: 1725-36034-001_B.doc 49
Parameter Value Description Notes
sip:name@domain Domain where the mail
resides.
PROXYn
_MAIL_NOTIFY [email protected].
xxx
or Contact from whom
mail notification
originates. See config
file example for more
information. n = 1, 2, 3
name = mail server contact
name.
xxx.xxx.xxx.xxx = IP address.
sip:name@domain Domain where the mail
resides.
AUTH
[see warning note below] username;password Credentials.
In general credentials
are needed for each
registered line.
2 .
username = The dial number
or string that identifies the line
appearance. Generally an
extension or phone number.
password = a secure
password created by the
system administer which
enables a handset to register
and/or function.
CODECS codec1, codec2 Comma-separated list
of supported codecs in
order of preference. Defaults to “g711u, g711a”. if
either is omitted it will be
added to the end of the list.
LINEn username The dial # or name. n = 1, 2, 3, 4, 5
The registered contact
becomes:
sip:username@domain
LINEn _PROXY i SIP proxy server for this
line. n = 1, 2, 3, 4, 5
i = the number of the proxy
server 1, 2, 3.
LINEn _CALLID callerid String that displays at
the far end. n = 1, 2, 3, 4, 5
callerid = the text that will
display as the caller ID on the
called handset.
2 WARNING: providing credentials by using the AUTH parameters in the configuration files is a security risk and should be
avoided by entering usernames and passwords in admin menu or by allowing the user to login at startup time. Credentials entered
here are in plain text and accessible by anyone who can access the TFTP server files. Credentials stored in the SIP server or in the
handsets are protected.