Polycom SpectraLink 1725-36034-001 - Manual (Page 65)

Using the SIP Handset
PN: 1725-36034-001_B.doc 65
If you want to… Then…
Place a call 1 Press the START key and wait for a dial tone.
2 Dial the numbers and press START. Listen for the ring to indicate the
alerting of the called party.
Note: Line 1 is the default line
Example:
1
Line 1 [your dial number]
*To: [dialed number]
Hold Rej
Mute
Place a second call on
the same line Only outgoing calls are permitted as the second call on a given line. If there
is an incoming call to the number assigned to the line, the caller will get a
busy tone and be routed to voicemail or to the second appearance of that
call number, if defined.
3 To access the second call dial tone, press LINE + [the line number].
4 Dial the number for the second call.
5 Press
START to place the call.
6 When a second call is active on the same line appearance, the second
call appears below the first on the handset display.
7 Use LINE + [the line number] to toggle between calls. The selected call
is in bold type the other call is faded.
Example:
The following example shows an active incoming call as call one on line 1
(Fr or From) and an outgoing call on hold as call two on line 1 (To). The
bold text on row 4 indicates that call one is the currently selected call and
that any softkeys or menu functions will apply to call one. The asterisk (
*) on
row 4 indicates that audio is currently flowing for call one.
1
Line 1 [your dial number]
*Fr: [caller ID of caller]
=To: [number you dialed]
Hold Mute End
Place a call on a
different line 8 Press START and listen for dial tone and then press LINE.
or to predial the number just press the LINE key.
9 Navigate to desired line and press Select.
10 Dial the number.
11 Press the Dial softkey or START to initiate the call.