beautypg.com

Polycom SpectraLink 1725-36034-001 User Manual

Page 32

background image

SpectraLink 8002 Wireless Telephones Configuration and Administration (SIP)

32

PN: 1725-36034-001_B.doc

WPA2-PSK

The security features of WPA2 (Wi-Fi Protected Access)

using PSK are available and may be used if supported by the APs in
the facility. Select either

Passphrase

and enter a passphrase between

eight and 63 characters in length or

Pre-shared Key

and enter the 256-

bit key code.

Regulatory Domain

The Regulatory Domain will default to

None

on the handset display.

FCC requirements dictate that the menu for changing the domain be
available by password, which in this case is the

LINE

key. To change

the domain, press

LINE

and then enter the digits that represent the

site’s domain. Note that both digits must be entered.

01

North America

02

Europe (except Spain and France); Japan (channels 1-13)

04

Spain

05

France

06

Korea

As of this writing, Spain and France are adopting the general
European regulatory rules. Check with your wireless LAN
administrator or supplier regarding which domain to enter in these
countries.

Transmit Power

Available Transmit Power is regulated by domain. The Regulatory
Domain setting above affects the options available for this setting. The
default setting is

Maximum

which in North America is 100 mW. The

Maximum in other domains is 30 mW. Transmit Power may be set to
a lower number if necessary by selecting one of the other levels. If
changed from the default, ensure the Transmit Power setting is the
same on all handsets and all APs.

Power is limited to 30mW in regulatory domains other than North
America.

See Appendix A for the full list of certified countries and the
corresponding domain for each.

This manual is related to the following products: