Patton electronic Patton SmartLink M-ATA - Manual (Page 64)

SNMP Configuration 64
SmartLink M-ATA Getting Started Guide 6 • System
SNMP Configuration
Figure 40. SNMP Configuration window
SNMP Trap Configuration
IP address
Trap host IP address.
Trap Community
The community name used by the SNMP manager to verify traps. The default value is public.
SNMP Community Configuration
Read Community
The community name used by the SNMP manager when reading SNMP data items from a client MIB. The
default value is public.
Write Community
The community name used by the SNMP manager when setting SNMP data items in a client’s MIB. The
default value is public.
SNMP System Configuration
System Description
Description of the unit (e.g. “John’s phone”)
System Object Id
A vendor’s enterprise ID
Saving your work
When you are finished configuring settings, click the Save SNMP Settings button to save the changes.