beautypg.com

Selective call forward settings, Incoming caller #1–8, Forward destination #1–8 – Patton electronic Patton SmartLink M-ATA User Manual

Page 46: Incoming call block, Block caller id, Outgoing call block, Digit pattern, Incoming call block section of phone 1 window

background image

Phone 1

46

SmartLink M-ATA Getting Started Guide

5 • Telephony

Selective Call Forward Settings

Figure 24. Selective Call Forward Settings section of Phone 1 window

Incoming caller #1–8
Up to 8 incoming calls can be selected for call forwarding.

Forward destination #1–8
Up to 8 destinations to which incoming calls can be forwarded.

Incoming Call Block

Figure 25. Incoming Call Block section of Phone 1 window

Block Caller ID
Specify a Caller ID for call block.

Outgoing Call Block

Outgoing call block allows for the blocking of an outbound call based on the digit pattern dialed. For example:
outbound call blocking may be used to prevent an end user from dialing long distance or toll calls. Outbound
call blocking uses the same digit matching process as the dial plan described in appendix

C, “Dial plans”

on

page 80.

Figure 26. Incoming Call Block section of Phone 1 window

Digit Pattern
The Digit Pattern box is where you can specify the outgoing call block pattern.

Example: Specifying an outgoing call block pattern of 002|009|0204 will block all outbound calls to numbers
002, 009, or 0204.