Patton electronic Patton SmartLink M-ATA - Manual (Page 54)

Service Access 54
SmartLink M-ATA Getting Started Guide 6 • System
NTP Server
Specify the IP address of the NTP server.
Time Zone
Select the GMT time zone for your location. For help in determining the time zone, go to the UTC/GMT
Conversion website at
http://www.dxing.com/utcgmt.htm .
Adjust clock for daylight savings
Select Yes if you want the M-ATA to automatically compensate for daylight savings time.
Saving your work
When you are finished configuring settings, click the Save button to save the changes.
Service Access
Figure 31. Service Access window
Enable HTTP
When checked access to the web configuration interface (HTTP) of the SmartLink M-ATA through the WAN
interface port is enabled.
Note If the Enable HTTP option is not checked, your WAN service provider will
no longer be able to access the SmartLink M-ATA to make
configuration changes.
Enable Ping Reply
When checked, the SmartLink M-ATA will reply to ping requests received on the WAN port. If the option is
not checked, the SmartLink M-ATA will not respond to ping requests received on the WAN port.
Saving your work
When you are finished configuring settings, click the Save Service Access Settings button to save the changes.