beautypg.com

System information, System uptime, Lan ip address – Patton electronic Patton SmartLink M-ATA User Manual

Page 23: Mac address, Application version, Config date

background image

System information

23

SmartLink M-ATA Getting Started Guide

3 • Home

System information

\

Figure 3. SmartLink VoIP download and configuration Home page

System Uptime

Shows how long the SmartLink M-ATA has been operating since the last time it was reloaded (either by pow-
ering the unit off and then on again, or by selecting System > Reload).

LAN IP Address

The IP address of the SmartLink M-ATA. If (Static) is shown next to the address, it means the IP address was
assigned to the SmartLink M-ATA under the LAN Settings. (Dynamic) indicates the IP address was learned
via DHCP.

MAC address

The media access control (MAC) address of the Ethernet interface in the SmartLink.

Application Version

The SmartLink firmware version number.

Config Date

The date of the configuration file that was downloaded from an auto-upgrade server.