Pixel Magic Systems VPS3800 - Manual (Page 66)

If the Analog output is configured as YPbPr, the OSD turns to the following page:
7.7.4 OUTPUT PORT CONFIGURATION WHEN IN PASSTHRU MODE
• Passthru from SDI and analog input is available only in firmware version 2.00 or later
• Passthru to Analog output is available only in firmware version 2.00 or later
This option defines the characteristics of output ports when in Passthru mode.
• You can define the format of the HDMI output, which include:
• Color Space
• Output Level
• Sync Polarity
• You can also define the characteristics of the analog output port, which include:
• Color Space
• Sync Polarities
• Voltage Pump
• Those formats can also be Same as Input, besides the fixed options. The following table
lists exactly what the output color space is if defined as Same as Input:
Input HDMI Output Analog Output
HDMI RGB RGB RGBHV
HDMI YCbCr 4:2:2 YCbCr 4:2:2 YPbPr
HDMI YCbCr 4:4:4 YCbCr 4:4:4 YPbPr
SDI YCbCr 4:2:2 YPbPr
Analog RGBS RGB RGBS
Analog RGsB or RGBHV RGB RGBHV
Analog YPbPr YCbCr 4:2:2 YPbPr
S-Video YCbCr 4:2:2 YPbPr
Composite YCbCr 4:2:2 YPbPr
66