Paradyne M/HDSL Standalone Termination Unit Hotwire 7984 - Manual (Page 81)

A-1 7984-A2-GB20-10 February 1999
Configuration Option Tables
A
Overview
The tables in this appendix summarize the configuration options accessed when
you select the Configuration option on the Main Menu. The Configuration options
are arranged into groups based upon functionality.
Select . . . To Access the . . . To Configure the . . .
Network Network Interface Options , Table A-1 T1 M/HDSL network
interface ports.
DSX Interface DSX-1 Interface Options , Table A-2 DSX-1 interface port.
System
Options System Options , Table A-3 General system options of
the unit.
Communication
Port Communication Port Options , Table A-4 Unit’s COM port options.
Management
and
Communication H Telnet Session Options , Table A-5
H Communication Protocol Options ,
Table A-6
H General SNMP Management Options ,
Table A-7
H SNMP NMS Security Options , Table A-8
H SNMP Traps Options , Table A-9
Management support of the
unit through SNMP and
Telnet.
NOTE:
All changes to configuration options must be saved. Refer to Saving
Configuration Options in Chapter 3, Initial Startup and Configuration.