Paradyne M/HDSL Standalone Termination Unit Hotwire 7984 - Manual (Page 12)

About the Hotwire 7984 Standalone Termination Unit
1-2 7984-A2-GB20-10 February 1999
H
Local Management (standalone unit). Provides local management using a:
— Terminal or equivalent through the COM port of the unit
— Telnet through the COM port of the unit
— NMS connection through the 10BaseT port
H Remote Management (DSLAM card). Provides remote management using:
— VT100 Terminal or PC via the Management Serial port of the DSLAM
— Network Management System (NMS) via the COM port or MCC port of
the DSLAM
— Using SNMP or Telnet through the 10BaseT port or the Internal
Management Channel (IMC)
— Telnet over the EOC
H
Alarm Indication. Provides front panel status LEDs.
H Diagnostic Testing. Provides the capability to diagnose device and network
problems and perform digital loopbacks, pattern tests, and self-test.
H
Device and Performance Monitoring. Provides the capability of tracking
and evaluating the unit’s operation, including health and status, and error-rate
monitoring.