Paradyne M/HDSL Standalone Termination Unit Hotwire 7984 User Manual

Page 102

Configuration Option Tables

A-22

7984-A2-GB20-10

February 1999

Table A-9.

SNMP Traps Options (3 of 3)

Link Traps

Possible Settings: Disable, Up, Down, Both
Default Setting: Both

Determines if SNMP traps are generated for link up and link down for one of the
communication interfaces.

Disable – No

linkUp or linkDown SNMP traps are generated.

Up – A

linkUp trap is generated when the 7984 Termination Unit recognizes that one of

the communication interfaces is operational.

Down – A

linkDown trap is generated when the 7984 Termination Unit recognizes a

failure in one of the communication interfaces.

Both – Sends trap messages for detection of both

linkUp and linkDown.

NOTE:

in Appendix B, Standards Compliance for

Possible Settings: Network, DSX, All
Default Setting: All

Determines if the SNMP

linkUp, SNMP linkDown, and interface-related

enterpriseSpecific traps are generated for the network interface, DSX port, or both.

Network – SNMP trap messages are generated for the network interface.

DSX – SNMP trap messages are generated for the DSX port.

All – SNMP trap messages are generated for the network T1 interface, COM port and
the DSX ports.