Polycom DOC2560C - Manual (Page 97)

Polycom RMX 1500/2000/4000 Getting Started Guide
3-19
Reserve
Resources for
Video Participants Enter the number of video participants for which the
system must reserve resources.
Default: 0 participants.
Maximum:
• MPM Mode: 80 participants.
• MPM+ Mode: 160 participants.
• MPMx Mode: 180 participants (Double card)
• MPMx Mode: 90 participants (Single card)
Reserve
Resources for
Audio Participants Enter the number of audio participants for which the
system must reserve resources.
Default: 0 participants.
Maximum:
• MPM Mode: 80 participants.
• MPM+ Mode: 200 participants (if all ports are set
to Audio Only).
• MPMx Mode: 720 participants (Double card, with
all ports are set to Audio Only).
• MPMx Mode: 360 participants (Single card, with
all ports are set to Audio Only).
Maximum Number
of Participants Indicate the total number of participants that can be
connected to the conference. The automatic setting
indicates that the maximum number of participants
that can be connected to the MCU is determined
according to resource availability.
Note: If a number is specified, it should be large
enough to accommodate the participants specified in
the Reserve Resources for Video/Audio Participants
fields.
Enable ISDN/
PSTN Dial-in Select this check box if you want ISDN and PSTN
participants to be able to connect directly to the
conference.
ISDN/PSTN
Network Service The default Network Service is automatically
selected. A different ISDN/PSTN Network Service
can be selected from the Network Services list.
Table 3-2 New Conference – General Options (Continued)
Field Description