Installing the rmx 2000, Mounting the rmx 2000 in a rack, Installing the rmx 2000 -12 – Polycom DOC2560C User Manual

Page 44: Mounting the rmx 2000 in a rack -12

Chapter 2-First Time Installation and Configuration

2-12

Installing the RMX 2000

•

The following procedures have to be performed to install the RMX
2000 in your site:

•

Installing the RMX in a rack or as a standalone

•

Connecting the RMX 2000 to the power source

•

Connecting the network (LAN, IP and ISDN) cables to the RMX

Mounting the RMX 2000 in a Rack

There are two methods for installing the RMX in a 19” rack:
•

Using rack brackets on the RMX 2000
—

Install rack brackets, supplied by the rack manufacturer, in the

rack.

—

Mount the RMX 2000 on top of the rack brackets.

—

Fasten the RMX to the rack with screws through the four holes in
the RMX’s front mounting brackets.

For detailed instructions, precautions and requirements for installing the RMX
2000 refer to the Polycom RMX 2000 Hardware Guide.