Polycom DOC2560C - Manual (Page 52)

Chapter 2-First Time Installation and Configuration
2-20
Procedure 3: Connection to MCU
1 Start the RMX Web Client application on the workstation.
a
In the browser’s address line, enter the IP address of the Control
Unit in the format:
http://,
as
defined in the USB key.
b Press Enter.
The RMX Web Client Login screen is displayed.
2 In the RMX Web Client Login screen, enter the default Username
(POLYCOM) and Password (POLYCOM) and click Login.
The RMX Web Client opens and the Product Activation dialog box
appears with the serial number filled in:
3 In the Activation Key field, enter or paste the Product Activation Key
obtained earlier.
4 Click OK.
As no Default IP Network Service is defined, the system automatically
starts the Fast Configuration Wizard.
If Windows7™ is installed on the workstation, Protected Mode must be
disabled before connecting to the MCU running Version 6.0 software.
For more information see ”Windows 7™ Security Settings” on page
1-12 .