Panasonic VQT2H52 - Manual (Page 92)

92
VQT2H52
∫ To watch images on a regular TV
(4:3) or when both sides of the
images do not appear on the
screen
Change the menu setting to display the images
correctly. (Check the TV setting.)
Select the menu. ( l 29)
Example of images with a 16:9 aspect ratio on
a regular TV (4:3)
≥ If a wide-screen TV is connected, adjust the
aspect setting on the TV. (Refer to the
operating instructions of the TV for details.)
∫ To display the on-screen
information on the TV
When the menu setting is changed, the
information displayed on the screen (operation
icon and time code etc.) can be displayed/not
displayed on the TV.
Select the menu. ( l 29)
[OFF]:
Not displayed
[SIMPLE]*:
Information partially displayed
[DETAIL]:
All information displayed
* This setting is only available in recording
mode.
≥ When the unit is purchased, the recording
mode is set to [SIMPLE] and playback mode is
set to [OFF].
≥ When the power is turned off, the settings
return to these values.
≥ When connecting with a HDMI mini cable, be sure to connect to a HDMI input terminal. Do not
connect to a HDMI output terminal on other products.
≥ When an HDMI mini cable or component cable is simultaneously connected with an AV cable, the
output from the HDMI mini cable or component cable is prioritized.
[SETUP] # [TV ASPECT] # [4:3]
[TV ASPECT] setting
[16:9] [4:3]
[SETUP]
# [EXT. DISPLAY] # desired
setting
Refer to the following support site for information about Panasonic TVs with an SD card slot
for playing back your pictures.
http://panasonic.net/
≥ For details on how to play back, please read the operating instructions for the TV.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 92 ページ ２００９年７月６日 月曜日 午後１時４６分