Panasonic VQT2H52 - Manual (Page 115)

115
VQT2H52
∫ If the driver has not been
recognized properly
Use the following methods to enable it to be
recognized.
Method 1:
Turn off the unit and your PC once and try
verifying again.
Method 2:
Remove the SD card and try verifying again.
Method 3:
Try connecting the unit to another USB port on
your PC.
∫ To disconnect USB cable safely
1 Double click the ( ) icon in task
tray displayed on the PC.
≥ Depending on your PC’s settings, this icon
may not be displayed.
2 Select [USB Mass Storage Device] and
click [Stop].
3
Verify [MATSHITA HDC-SD10/SD USB
Device] is selected and click [OK].
Verify [MATSHITA HDC-TM10/SD USB
Device] or [MATSHITA HDC-TM10/MEM
USB Device] is selected and click [OK].
Verify [MATSHITA HDC-TM15/SD USB
Device] or [MATSHITA HDC-TM15/MEM
USB Device] is selected and click [OK].
HDCSD10_TM10_TM15P-VQT2H52_eng.book 115 ページ ２００９年７月６日 月曜日 午後１時４６分