Panasonic VQT2H52 - Manual (Page 88)

88
VQT2H52
Playback
Editing
6 Relay scene combining
[HDC-TM10/HDC-TM15]
You can combine the relayed scene ( l 58) in the built-in memory and the continued scene in the
SD card to be one into the SD card.
A Built-in memory
B SD card
C Range of relay recording
≥ Change the mode to and touch the play mode select icon to select the desired media.
( l 70)
1
Insert the SD card that was used
for relay recording.
2
Select the menu. ( l 29)
3
When the confirmation message
appears, touch [YES].
≥ Combine the relayed scenes into a SD
card.
≥ Scene in the built-in memory will be
deleted.
4
Touch [EXIT] when the relay
scene combining complete
message is displayed.
≥ The thumbnail view of the SD card is
indicated.
≥ Relay recording information will be deleted
when the relay scenes are combined, and
relay recording will be possible again.
≥ When the relayed scenes in the built-in
memory or SD card are deleted, combining
of the relayed scenes will not be possible.
To cancel relay information
≥ When the relay information is canceled,
combining of the relayed scenes will not be
possible anymore.
≥ When the confirmation message appears,
touch [YES].
Relay recorded scene Relay scene combining
[COPY] # [RELAY SCENE COMBINE] #
[YES]
[COPY]
# [RELAY INFO CANCEL] # [YES]
Combining of the relay scene cannot be
performed if the available space on the SD
card is less than the volume of the relayed
scene in the built-in memory. It is
recommended to combine the relay scene
using a DVD burner or the HD Writer AE 1.5.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 88 ページ ２００９年７月６日 月曜日 午後１時４６分