Panasonic VQT2H52 - Manual (Page 114)

114
VQT2H52
With a PC
Setup
2 Connecting to a PC
≥ Connect this unit to the PC after the software applications are installed.
≥ Remove the supplied CD-ROM from your PC.
A USB cable (supplied)
1
Connect this unit to the AC
adaptor.
≥ It is possible to use the unit connected to the
PC with the batteries only, but you will not be
able to write data into the unit.
2
Turn on the unit.
≥ This function is available in all modes.
3
Connect this unit to a PC.
The USB function selection screen will appear.
≥ Insert the USB connectors as far as they will go.
≥ Do not use any other USB cables except the
supplied one. (Operation is not guaranteed
with any other USB cables.)
4
Touch [PC].
≥ The Smart wizard screen is automatically
displayed when HD Writer AE 1.5 is installed.
≥ This unit is automatically recognized as an
external drive of the PC. ( l 116)
≥ When you select an option other than [PC],
reconnect the USB cable.
≥ When the unit is connected to a PC, its
power cannot be turned off.
Disconnect the USB cable, before turning
this unit off.
≥ Do not disconnect the USB cable or the AC
adaptor while the access lamp is on or card
access icon (
) appears on the unit screen.
≥ /
Do not disconnect the USB cable or the AC
adaptor while the access lamp is on or built-in
memory access icon (
) appears on the unit
screen.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 114 ページ ２００９年７月６日 月曜日 午後１時４６分