Self-timer, Select the menu. ( l 29), Built-in flash – Panasonic VQT2H52 User Manual

Page 63

VQT2H52

Self-timer

This is for recording still pictures using the timer.

Select the menu. (

l 29)

[PICTURE]

# [SELF TIMER] # [10 SECONDS] or [2 SECONDS]

[10 SECONDS]: Records after 10 seconds
[2 SECONDS]: Records after 2 seconds
≥ When the

button is pressed, a still picture is recorded after

the

Ø10 or Ø2 display and the recording lamp flash for the time

which has been set.

≥ After recording, the self-timer is canceled.
≥ In Auto focus mode, if the

button is pressed halfway once

and then fully, the lens focuses on the subject when the

button is

pressed halfway.

≥ If the

button is pressed fully all at once, the lens focuses on

the subject just before recording.

To stop the timer midway through
Press the MENU button.

Built-in flash

When the

button is pressed, the flash is activated and the

picture will be recorded. Use the built-in flash in order to record
still pictures in dark places.

Select the menu. (

l 29)

[PICTURE]

# [FLASH] # [ON] or [AUTO]

≥ This function’s default setting is [AUTO].
≥ When the

button is pressed halfway, the flash indicator will

appear on the screen.

[ON]:

[AUTO]:

ßA

[OFF]:
≥ The unit automatically determines if the flash is necessary even

when it has been set to [OFF] by detecting the ambient
brightness. (If it determines that the flash is necessary, the

indication lights up in red when the

button is pressed

halfway.)

∫ To adjust the brightness of the flash
≥ The Intelligent auto mode is set to off. (

l 39)

Select the menu. (

l 29)

[PICTURE]

# [FLASH LEVEL] # desired setting

[

ßj]: Less bright

[

ßd0]: Normal

[

ßi]: Much brighter

Function

Effect/Setting method

HDCSD10_TM10_TM15P-VQT2H52_eng.book 63 ページ２００９年７月６日　月曜日　午後１時４６分